Package: debconf
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 609
Maintainer: Colin Watson <cjwatson@ubuntu.com>
Architecture: all
Version: 1.5.42ubuntu1
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.6.1-4)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog | gnome-utils, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/bash_completion.d/debconf 8fa1862734fbe54d7178aaaa419f5a11
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.
Original-Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>

Package: libelf1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 140
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: elfutils
Version: 0.152-1ubuntu3
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://fedorahosted.org/elfutils/
Original-Maintainer: Kurt Roeckx <kurt@roeckx.be>

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 170
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 0.5.7-2ubuntu2
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.11)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/
Original-Maintainer: Gerrit Pape <pape@smarden.org>

Package: coreutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 4156
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 8.13-3ubuntu3.2
Replaces: mktemp, timeout
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libacl1 (>= 2.2.51-5), libattr1 (>= 1:2.4.46-5), libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libselinux1 (>= 1.32)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc od
 paste pathchk pinky pr printenv printf ptx pwd readlink rm rmdir runcon
 sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test
 timeout touch tr true truncate tsort tty uname unexpand uniq unlink
 users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils
Original-Maintainer: Michael Stone <mstone@debian.org>

Package: debianutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 208
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 4.2.1ubuntu2
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are: installkernel run-parts
 savelog tempfile which.
Original-Maintainer: Clint Adams <clint@debian.org>

Package: initramfs-tools
Status: install ok installed
Multi-Arch: foreign
Priority: optional
Section: utils
Installed-Size: 363
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: all
Version: 0.99ubuntu13.4
Provides: linux-initramfs-tool
Depends: initramfs-tools-bin (>= 0.99ubuntu13.4), initramfs-tools-bin (<< 0.99ubuntu13.4.1~), klibc-utils (>= 1.5.9-1), busybox-initramfs (>= 1:1.13.3-1ubuntu5), cpio, module-init-tools, udev (>= 147~-5), findutils (>= 4.2.24), util-linux (>> 2.15~rc1)
Suggests: bash-completion
Breaks: cryptsetup (<< 2:1.1.0-2.1), elilo (<< 3.12-3.1~), lilo (<< 22.8-8.2~), mountall (<< 2.0~), s390-tools (<< 1.8.3-2~)
Conflicts: usplash (<< 0.5.50)
Conffiles:
 /etc/bash_completion.d/initramfs-tools 7eeb7184772f3658e7cf446945c096b1
 /etc/initramfs-tools/update-initramfs.conf e2026d4603e7161efaccca519aeb1297
 /etc/initramfs-tools/initramfs.conf 8801535d9bec98754eea6a172f956d42
 /etc/kernel/postrm.d/initramfs-tools e22d1ab0d7a7a1b66ae6d71ea4f21938
 /etc/kernel/postinst.d/initramfs-tools fe7713b9a74a10ed71d1e7dd93afc209
Description: tools for generating an initramfs
 This package contains tools to create and boot an initramfs for packaged 2.6
 Linux kernel. The initramfs is a gzipped cpio archive. At boot time, the
 kernel unpacks that archive into RAM, mounts and uses it as initial root file
 system. The mounting of the real root file system occurs in early user space.
 klibc provides utilities to setup root. Having the root on MD, LVM2, LUKS or
 NFS is also supported.
 Any boot loader with initrd support is able to load an initramfs archive.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: makedev
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 126
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2.3.1-89ubuntu2
Depends: base-passwd (>= 3.0.4)
Conflicts: udev (<= 0.024-7)
Description: creates device files in /dev
 The MAKEDEV executable is used to create device files, often in /dev.
 .
 Device files are special files through which applications can interact
 with hardware.
 .
 This package is not necessary for most modern Linux systems, where the udev
 subsystem provides a more dynamic mechanism for device file management.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1020
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: shadow
Version: 1:4.1.4.2+svn3283-3ubuntu5.1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs be0977c1c1c84c62823c7d7d4e099067
 /etc/securetty 1a028cba3ab1989a6a3e395720806069
 /etc/pam.d/su 7309fb874571fe5447321b43448a50b3
 /etc/pam.d/login f6fd8b05973b278e6a2b7c61bc7732cd
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: gpgv
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 299
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: gnupg
Version: 1.4.11-3ubuntu2.5
Depends: libbz2-1.0, libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libreadline6 (>= 6.0), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is a stripped-down version of gnupg which is only able to check
 signatures.  It is smaller than the full-blown gnupg and uses a
 different (and simpler) way to check that the public keys used to
 make the signature are trustworthy.
Homepage: http://www.gnupg.org
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: libssl1.0.0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 1815
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: openssl
Version: 1.0.1-4ubuntu5.11
Depends: libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), zlib1g (>= 1:1.1.4), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Breaks: openssh-client (<< 1:5.9p1-4), openssh-server (<< 1:5.9p1-4)
Description: SSL shared libraries
 libssl and libcrypto shared libraries needed by programs like
 apache-ssl, telnet-ssl and openssh.
 .
 It is part of the OpenSSL implementation of SSL.
Original-Maintainer: Debian OpenSSL Team <pkg-openssl-devel@lists.alioth.debian.org>

Package: libdbus-1-3
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 253
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: dbus
Version: 1.4.18-1ubuntu1.4
Depends: libc6 (>= 2.15-0ubuntu8)
Pre-Depends: multiarch-support
Recommends: dbus
Breaks: kde-window-manager (<< 4:4.4.5-9), kdebase-workspace-bin (<< 4:4.4.5-9)
Description: simple interprocess messaging system (library)
 D-Bus is a message bus, used for sending messages between applications.
 Conceptually, it fits somewhere in between raw sockets and CORBA in
 terms of complexity.
 .
 D-Bus supports broadcast messages, asynchronous messages (thus
 decreasing latency), authentication, and more. It is designed to be
 low-overhead; messages are sent using a binary protocol, not using
 XML. D-Bus also supports a method call mapping for its messages, but
 it is not required; this makes using the system quite simple.
 .
 It comes with several bindings, including GLib, Python, Qt and Java.
 .
 The daemon can be found in the dbus package.
Homepage: http://dbus.freedesktop.org/
Original-Maintainer: Utopia Maintenance Team <pkg-utopia-maintainers@lists.alioth.debian.org>

Package: module-init-tools
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 259
Maintainer: Scott James Remnant <scott@ubuntu.com>
Architecture: armhf
Version: 3.16-1ubuntu2
Depends: libc6 (>= 2.8), upstart-job
Pre-Depends: dpkg (>= 1.15.7.2)
Breaks: initramfs-tools (<< 0.92bubuntu23)
Conffiles:
 /etc/init/module-init-tools.conf 48db1b767c3148fd83eba59d12fc9a5e
 /etc/depmod.d/ubuntu.conf 7c8439ef36b12e5f226b5dbfa20b8c2d
 /etc/modprobe.d/blacklist.conf bc6754fa320733c6d239a4bb0148ffd7
 /etc/modprobe.d/blacklist-framebuffer.conf 96f2f501cc646b598263693c8976ddd1
 /etc/modprobe.d/blacklist-watchdog.conf 55327f9270c8a6257a833c4d127a39e1
 /etc/modprobe.d/blacklist-firewire.conf 9cc07a17e8e64f9cd35ff59c29debe69
 /etc/modprobe.d/blacklist-rare-network.conf 8fb4b96124e461f53adceba9ca91f09a
 /etc/modprobe.d/blacklist-ath_pci.conf d1da9bb08c2b0f56f3be93fd0e37946b
Description: tools for managing Linux kernel modules
 This package contains a set of programs for loading, inserting, and
 removing kernel modules for Linux.
Homepage: http://www.kerneltools.org/
Original-Maintainer: Marco d'Itri <md@linux.it>

Package: libffi6
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 61
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libffi
Version: 3.0.11~rc1-5
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Description: Foreign Function Interface library runtime
 A foreign function interface is the popular name for the interface that
 allows code written in one language to call code written in another
 language.
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libuuid1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 105
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: util-linux
Version: 2.20.1-1ubuntu3
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit universally unique
 ids (UUIDs).  A UUID is an identifier that is unique across both
 space and time, with respect to the space of all UUIDs.  A UUID can
 be used for multiple purposes, from tagging objects with an extremely
 short lifetime, to reliably identifying very persistent objects
 across a network.
 .
 See RFC 4122 for more information.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: lsb-base
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: misc
Installed-Size: 75
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: lsb
Version: 4.0-0ubuntu20.3
Replaces: lsb (<< 2.0-6), lsb-core (<< 2.0-6)
Depends: sed, ncurses-bin
Conflicts: lsb (<< 2.0-6), lsb-core (<< 2.0-6)
Conffiles:
 /etc/lsb-base-logging.sh 0aa55cad853be603ce31790c696e394b
Description: Linux Standard Base 4.0 init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linux-foundation.org/en/LSB
Original-Maintainer: Chris Lawrence <lawrencc@debian.org>

Package: procps
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 583
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 1:3.2.8-11ubuntu6.3
Replaces: bsdutils (<< 2.9x-1), watch
Provides: watch
Depends: libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libncurses5 (>= 5.5-5~), libncursesw5 (>= 5.6+20070908), libtinfo5, upstart-job, lsb-base (>= 3.0-10), initscripts
Recommends: psmisc
Conflicts: libproc-dev (<< 1:1.2.6-2), pgrep (<< 3.3-5), procps-nonfree, w-bassman (<< 1.0-3), watch
Conffiles:
 /etc/sysctl.conf d1cb9fea7a813e02111874f040cfc04b
 /etc/sysctl.d/README c20074b9b11a5202758c69d7bcb6996f
 /etc/sysctl.d/10-kernel-hardening.conf 5c1388f00011a287cdeba60208c674e1
 /etc/sysctl.d/10-ptrace.conf 47f40494b2fc698e15549e0a4a79e81c
 /etc/sysctl.d/10-network-security.conf 4ac7258f5336e7eeaf448c05ab668d3c
 /etc/sysctl.d/10-ipv6-privacy.conf e9473d12b4a7069d6a3ca8b694511ddf
 /etc/sysctl.d/10-console-messages.conf 154f6f5c5810d10bb303fb6a8e907c6a
 /etc/sysctl.d/10-zeropage.conf e1efe66ec4ae7584a6dcc67913799de2
 /etc/init/procps.conf 96170a339d08797dc90d69b01d6bf610
Description: /proc file system utilities
 This package provides command line and full screen utilities for browsing
 procfs, a "pseudo" file system dynamically generated by the kernel to
 provide information about the status of entries in its process table
 (such as whether the process is running, stopped, or a "zombie").
 .
 It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop,
 snice, sysctl, tload, top, uptime, vmstat, w, and watch.
Homepage: http://procps.sf.net/
Original-Maintainer: Craig Small <csmall@debian.org>

Package: python-minimal
Essential: yes
Status: install ok installed
Multi-Arch: allowed
Priority: required
Section: python
Installed-Size: 159
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: python-defaults
Version: 2.7.3-0ubuntu2.2
Replaces: python (<= 2.4-1), python2.7 (<< 2.7.3)
Depends: python2.7-minimal (>= 2.7.3), dpkg (>= 1.13.20)
Recommends: python
Breaks: idle (<< 2.6), python (<= 2.4-1), python-all (<< 2.6), python-all-dbg (<< 2.6), python-all-dev (<< 2.6), python-dbg (<< 2.6), python-dev (<< 2.6), python-examples (<< 2.6), python-support (<< 1.0.10ubuntu2), python2.5-minimal (<< 2.5.5-7), python2.6-minimal (<< 2.6.5~rc2-2), python3.1-minimal (<< 3.1.2~rc1-2)
Conflicts: python-central (<< 0.5.5)
Description: minimal subset of the Python language (default version)
 This package contains the interpreter and some essential modules.  It's used
 in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.
Homepage: http://www.python.org/
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 345
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: ncurses
Version: 5.9-4
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conflicts: ncurses, ncurses-runtime
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: libpam0g
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 193
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam0g-util
Depends: libc6 (>= 2.8), debconf (>= 0.5) | debconf-2.0
Pre-Depends: multiarch-support
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libusb-0.1-4
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 64
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libusb
Version: 2:0.1.12-20
Replaces: libusb0
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: libccid (<< 0.9.2-3), libusb0
Description: userspace USB programming library
 Library for programming USB applications without the knowledge
 of Linux kernel internals.
Original-Maintainer: Aurelien Jarno <aurel32@debian.org>
Homepage: http://www.linux-usb.org/

Package: bsdutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 180
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: util-linux (2.20.1-1ubuntu3)
Version: 1:2.20.1-1ubuntu3
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.4.0)
Recommends: bsdmainutils
Description: Basic utilities from 4.4BSD-Lite
 This package contains the bare minimum number of BSD utilities needed
 to boot a Debian system: logger, renice, script, scriptreplay, and wall.
 The remaining standard BSD utilities are provided by bsdmainutils.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 132
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 0.0.6ubuntu2
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: ncurses-bin
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 448
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: ncurses
Version: 5.9-4
Pre-Depends: libc6 (>= 2.4), libtinfo5 (>= 5.9-3~)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 4036
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: perl
Version: 5.14.2-6ubuntu2.3
Replaces: libperl5.8 (<< 5.8.0-20), libscalar-list-utils-perl, libxsloader-perl, perl (<< 5.10.1-12), perl-modules (<< 5.10.1-1)
Provides: libscalar-list-utils-perl, libxsloader-perl, perl5-base, perlapi-5.14.2
Pre-Depends: libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), dpkg (>= 1.14.20)
Suggests: perl
Breaks: autoconf2.13 (<< 2.13-45), libfile-spec-perl (<< 3.3300), libmarc-charset-perl (<< 1.2), libscalar-list-utils-perl (<< 1:1.23), libxsloader-perl (<< 0.13)
Conflicts: doc-base (<< 0.10.3), libxml-sax-perl (<< 0.99+dfsg-1ubuntu0.1), mono-gac (<< 2.10.8.1-1ubuntu1), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules"
 and "perl-doc").
Original-Maintainer: Niko Tyni <ntyni@debian.org>

Package: sysv-rc
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 232
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: sysvinit
Version: 2.88dsf-13.10ubuntu11.1
Replaces: file-rc
Depends: debconf (>= 0.5) | debconf-2.0, sysvinit-utils (>= 2.86.ds1-62), insserv (>> 1.12.0-10)
Recommends: lsb-base (>= 3.2-14)
Suggests: sysv-rc-conf, bum
Breaks: initscripts (<< 2.86.ds1-63)
Conflicts: file-rc
Description: System-V-like runlevel change mechanism
 This package provides support for the System-V like system
 for booting, changing runlevels, and shutting down,
 configured through symbolic links in /etc/rc?.d/.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 2938
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 0.8.16~exp12ubuntu10.16
Replaces: manpages-pl (<< 20060617-3~)
Depends: ubuntu-keyring, libapt-pkg4.12 (>= 0.8.16~exp12ubuntu10.16), libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.6), gnupg
Pre-Depends: dpkg (>= 1.15.7.2)
Suggests: aptitude | synaptic | wajig, dpkg-dev, apt-doc, bzip2, lzma, python-apt
Conflicts: python-apt (<< 0.7.93.2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 4a235dbe7ba66310dbeb803664f3e400
 /etc/apt/apt.conf.d/20changelog 8baafd95750e9c31c45512ff7bde7043
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
 /etc/cron.daily/apt 24804a562eda58422fd0f084c062ef63
 /etc/kernel/postinst.d/apt-auto-removal a2cfbcc7da391b1d29c78769ecf4e9b6
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: libdrm2
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 89
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libdrm
Version: 2.4.46-1ubuntu0.0.0.1
Depends: libc6 (>= 2.15-0ubuntu8)
Pre-Depends: multiarch-support
Description: Userspace interface to kernel DRM services -- runtime
 This library implements the userspace interface to the kernel DRM
 services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI).
 The DRI is currently used on Linux to provide hardware-accelerated
 OpenGL drivers.
 .
 This package provides the runtime environment for libdrm.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libdrm-nouveau1a
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 78
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libdrm
Version: 2.4.46-1ubuntu0.0.0.1
Depends: libc6 (>= 2.15-0ubuntu8), libdrm2 (>= 2.4.3)
Pre-Depends: multiarch-support
Conflicts: libdrm-nouveau1
Description: Userspace interface to nouveau-specific kernel DRM services -- runtime
 This library implements the userspace interface to the nouveau-specific kernel
 DRM services. DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libpam-modules
Status: install ok installed
Multi-Arch: same
Priority: required
Section: admin
Installed-Size: 617
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libc6 (>= 2.8), libdb5.1, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.0.85), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.3-7ubuntu2)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/namespace.init 114e73ed5f40956527286e6213d305bc
 /etc/security/namespace.conf c600fa5899cfb3198a01dfba2bf281f3
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/time.conf c23fcbb29dda6c1499e6a5e5ade0265e
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/pam_env.conf ed3f430e418ad366ddb23307a8755249
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/limits.conf cbacdff4aa5f51749f191b32754946cb
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: tzdata
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: libs
Installed-Size: 1697
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 2013g-0ubuntu0.12.04
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-wheezy
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libudev0
Status: install ok installed
Multi-Arch: same
Priority: important
Section: admin
Installed-Size: 188
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: udev
Version: 175-0ubuntu9.4
Depends: libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Description: udev library
 libudev provides a set of functions for accessing the udev database
 and querying sysfs.
Homepage: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html

Package: ifupdown
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 168
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 0.7~beta2ubuntu10
Replaces: netbase (<< 4.00)
Depends: iproute (>= 20071016-1), libc6 (>= 2.15-0ubuntu8), upstart-job, lsb-base, initscripts (>= 2.88dsf-13.3)
Suggests: isc-dhcp-client | dhcp-client, ppp, rdnssd, net-tools
Conflicts: dhcp-client (<< 3.0)
Conffiles:
 /etc/init/network-interface.conf 296dd23a2833cc2bb5c646a833011eab
 /etc/init/networking.conf d3dc878505e8997b131bad117ad266d5
 /etc/init/network-interface-security.conf 8d6447a035b681f5fa22d168adcf8dec
 /etc/init/network-interface-container.conf 7fb0862f8c092b33c16ec0f05387fbfb
 /etc/network/if-down.d/upstart be2d7ca79c30064a88777f8c6c1d19fe
 /etc/network/if-up.d/upstart 2869783d5379a5acfaff5da1fc428718
Description: high level tools to configure network interfaces
 This package provides the tools ifup and ifdown which may be used to
 configure (or, respectively, deconfigure) network interfaces based on
 interface definitions in the file /etc/network/interfaces.
Original-Maintainer: Andrew O. Shadura <bugzilla@tut.by>

Package: mountall
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 207
Maintainer: Scott James Remnant <scott@ubuntu.com>
Architecture: armhf
Version: 2.36.4
Replaces: upstart (<< 0.6.3-2)
Depends: makedev, udev, plymouth, coreutils (>= 7.1), libc6 (>= 2.15-0ubuntu8), libdbus-1-3 (>= 1.2.16), libnih-dbus1 (>= 1.0.0), libnih1 (>= 1.0.0), libplymouth2 (>= 0.8.1-3), libudev0 (>= 151)
Pre-Depends: dpkg (>= 1.15.7.2)
Breaks: initscripts (<< 2.88dsf-13.3), policycoreutils (<< 2.0.69-2ubuntu4), usplash (<< 0.5.47)
Conffiles:
 /etc/dbus-1/system.d/Mountall.Server.conf 91b1414af1257d2ef089f84a3e5c1ed1
 /etc/init/mounted-debugfs.conf 462c8aab0d9d4e6e496b1e2be5910edc
 /etc/init/mountall-net.conf feff70cd7006f6763e24263d381940f3
 /etc/init/mountall-shell.conf aa05af89db3de044d1cd7f6971b46d9f
 /etc/init/mounted-var.conf 02f90856c91a46e9cbed1c35b92fec6c
 /etc/init/mountall-reboot.conf 43e3c229085a13005b0681a49b2bef51
 /etc/init/mounted-dev.conf d434b2b320f748c352e83edf25223ebf
 /etc/init/mounted-tmp.conf 289fa57d726885147a41b2b1f3695a29
 /etc/init/mounted-run.conf b40dc0421f76a9a581e16d91a4ec6137
 /etc/init/mounted-proc.conf 07198659bd06c1442a35882b2fae05fc
 /etc/init/mountall.conf 4ecc1e75cf68705e15e5e3106066223a
Description: filesystem mounting tool
 mountall mounts filesystems when the underlying block devices are
 ready, or when network interfaces come up, checking the filesystems
 first.

Package: libapt-pkg4.12
Status: install ok installed
Multi-Arch: same
Priority: important
Section: admin
Installed-Size: 2614
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: apt
Version: 0.8.16~exp12ubuntu10.16
Depends: libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libstdc++6 (>= 4.6), zlib1g (>= 1:1.2.3.3.dfsg)
Pre-Depends: multiarch-support
Description: package managment runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).
Original-Maintainer: APT Development Team <deity@lists.debian.org>

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 348
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 1:3.2-1ubuntu1
Replaces: diff
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: tar
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 580
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 1.26-4ubuntu1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libc6 (>= 2.8), libgcc1 (>= 1:4.4.0)
Suggests: bzip2, ncompress, xz-utils
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: libdrm-radeon1
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 95
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libdrm
Version: 2.4.46-1ubuntu0.0.0.1
Depends: libc6 (>= 2.15-0ubuntu8), libdrm2 (>= 2.4.38)
Pre-Depends: multiarch-support
Description: Userspace interface to radeon-specific kernel DRM services -- runtime
 This library implements the userspace interface to the radeon-specific kernel
 DRM services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libmount1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 191
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: util-linux
Version: 2.20.1-1ubuntu3
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.8), libgcc1 (>= 1:4.4.0), libselinux1 (>= 1.32)
Pre-Depends: multiarch-support
Description: block device id library
 The device mounting library, used by mount and mount helpers.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: zlib1g
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 127
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: zlib
Version: 1:1.2.3.4.dfsg-3ubuntu4
Provides: libz1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/
Original-Maintainer: Mark Brown <broonie@debian.org>

Package: adduser
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 568
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Version: 3.113ubuntu2
Replaces: manpages-it (<< 0.3.4-2), manpages-pl (<= 20051117-1)
Depends: perl-base (>= 5.6.0), passwd (>= 1:4.0.12), debconf | debconf-2.0
Recommends: ecryptfs-utils (>= 67-1)
Suggests: liblocale-gettext-perl, perl-modules
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/
Original-Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>

Package: locales
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 9152
Maintainer: Martin Pitt <martin.pitt@ubuntu.com>
Architecture: all
Source: langpack-locales
Version: 2.13+git20120306-3
Replaces: base-config, belocs-locale-data, belocs-locales-bin, libc6 (<< 2.3.6-0ubuntu6), libc6.1 (<< 2.3.6-0ubuntu6)
Depends: libc6 (>= 2.9-0ubuntu10) | libc6.1 (>= 2.9-0ubuntu10)
Conflicts: base-config, belocs-locale-data
Conffiles:
 /etc/locale.alias 6ac3cbee43012440edc6bcbade0a61ce
Description: common files for locale support
 This package provides support for localized environments (locales).
 It installs character and transliteration maps, provides the POSIX
 locale definition and provides common scripts for language pack
 handling.
 .
 The actual locale definitions are not part of this package, these are
 shipped in the language packs and are installed and removed
 automatically.

Package: libgcc1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 68
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: gcc-4.6 (4.6.3-1ubuntu5)
Version: 1:4.6.3-1ubuntu5
Provides: libgcc1-armhf
Depends: gcc-4.6-base (= 4.6.3-1ubuntu5), libc6 (>= 2.15-0ubuntu8)
Pre-Depends: multiarch-support
Breaks: gcc-4.1, gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libklibc
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 111
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: klibc
Version: 1.5.25-1ubuntu2
Description: minimal libc subset for use with initramfs
 klibc is intended to be a minimalistic libc subset for use with
 initramfs.  It is deliberately written for small size, minimal
 entanglement, and portability, not speed.  It is definitely a work in
 progress, and a lot of things are still missing.
Original-Maintainer: maximilian attems <maks@debian.org>

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 419
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 6.5ubuntu6.7
Replaces: base, dpkg (<= 1.15.0), lsb-release (<< 3.0-8), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3)
Conffiles:
 /etc/debian_version 931870fda5e3f942afc004db670b3cae
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/dpkg/origins/ubuntu ea35901c45553c3451f60476be94d2d8
 /etc/host.conf 89408008f2585c957c031716600d5a80
 /etc/issue 25501c0095a724f663b2cbbdc6dafc14
 /etc/issue.net d20a9b11ce1065860928346f54a4fe99
 /etc/lsb-release dd5349fdf209a8909b843da896a8e507
 /etc/os-release bec66b56e47621c51a8f7da2f009e235
 /etc/update-motd.d/00-header 4a1e6eed7a59f200b4267085721750a3
 /etc/update-motd.d/10-help-text 5064fb57493325202dded183ab0c4ebd
 /etc/update-motd.d/99-footer b0541f3c2e55c44149cd92bcc599c94c
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, /etc/nsswitch.conf,
 and others, and the text of several common licenses in use on Debian systems.
Original-Maintainer: Santiago Vila <sanvila@debian.org>

Package: mount
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 340
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: util-linux
Version: 2.20.1-1ubuntu3
Pre-Depends: libblkid1 (>= 2.20.1), libc6 (>= 2.8), libgcc1 (>= 1:4.4.0), libmount1 (>= 2.20.1), libselinux1 (>= 2.0.15)
Suggests: nfs-common (>= 1:1.1.0-13)
Description: Tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libreadline6
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 265
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: readline6
Version: 6.2-8
Depends: readline-common, libc6 (>= 2.11), libtinfo5
Pre-Depends: multiarch-support
Description: GNU readline and history libraries, run-time libraries
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: libncurses5
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 376
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: ncurses
Version: 5.9-4
Depends: libtinfo5 (= 5.9-4), libc6 (>= 2.4)
Pre-Depends: multiarch-support, libtinfo5 (>= 5.9-3)
Recommends: libgpm2
Description: shared libraries for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncurses.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: libplymouth2
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 211
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: plymouth
Version: 0.8.2-2ubuntu31.1
Replaces: plymouth (<< 0.7.0+git20090207-0ubuntu0.1~ppa4)
Depends: libc6 (>= 2.15-0ubuntu8), libpng12-0 (>= 1.2.13-4)
Breaks: casper (= 1.227), mountall (<< 2.8)
Description: graphical boot animation and logger - shared libraries
 Plymouth is an application that runs very early in the boot process
 (even before the root filesystem is mounted!) that provides a graphical
 boot animation while the boot process happens in the background.
 .
 This package contains the shared libraries.

Package: iproute
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: net
Installed-Size: 742
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 20111117-1ubuntu2.1
Provides: arpd
Depends: libc6 (>= 2.15-0ubuntu8), libdb5.1, libgcc1 (>= 1:4.4.0)
Recommends: libatm1
Suggests: iproute-doc
Conflicts: arpd
Conffiles:
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_dsfield 4264d5c7c8298300185aa04e1a736934
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_protos 95ce0b4b5b79f5a8a45941fb418a904c
 /etc/iproute2/ematch_map 0b9befbbbee4b415319b8070f18b9b88
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
Description: networking and traffic control tools
 The iproute suite, also known as iproute2, is a collection of
 utilities for networking and traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: http://www.linux-foundation.org/en/Net:Iproute2
Original-Maintainer: Debian iproute maintainers <ah-iproute@debian.org>

Package: initramfs-tools-bin
Status: install ok installed
Priority: optional
Section: utils
Installed-Size: 114
Maintainer: Ubuntu Kernel Team <kernel-team@lists.ubuntu.com>
Architecture: armhf
Source: initramfs-tools
Version: 0.99ubuntu13.4
Depends: libc6 (>= 2.15-0ubuntu8), libudev0 (>= 147)
Description: binaries used by initramfs-tools
 This package contains binaries used inside the initramfs images generated
 by initramfs-tools.
Original-Maintainer: Debian kernel team <debian-kernel@lists.debian.org>

Package: libattr1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 51
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: attr
Version: 1:2.4.46-5ubuntu1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 268
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 4.2.1-9
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4), libselinux1 (>= 1.32)
Description: The GNU sed stream editor
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Original-Maintainer: Clint Adams <clint@debian.org>
Homepage: http://www.gnu.org/software/sed/

Package: python2.7-minimal
Status: install ok installed
Multi-Arch: allowed
Priority: optional
Section: python
Installed-Size: 4649
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: python2.7
Version: 2.7.3-0ubuntu3.4
Replaces: python2.7 (<< 2.7.1~rc1-2~)
Depends: libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.1.1), libssl1.0.0 (>= 1.0.0), zlib1g (>= 1:1.2.0), python-minimal (>= 2.6.6-3+squeeze1)
Recommends: python2.7
Suggests: binfmt-support
Conflicts: binfmt-support (<< 1.1.2)
Conffiles:
 /etc/python2.7/sitecustomize.py d6b276695157bde06a56ba1b2bc53670
Description: Minimal subset of the Python language (version 2.7)
 This package contains the interpreter and some essential modules.  It can
 be used in the boot process for some basic tasks.
 See /usr/share/doc/python2.7-minimal/README.Debian for a list of the modules
 contained in this package.
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: klibc-utils
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 311
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: klibc
Version: 1.5.25-1ubuntu2
Depends: libklibc (= 1.5.25-1ubuntu2)
Description: small utilities built with klibc for early boot
 This package contains a collection of programs that are linked
 against klibc. These duplicate some of the functionality of a
 regular Linux toolset, but are typically much smaller than their
 full-function counterparts.  They are intended for inclusion in
 initramfs images and embedded systems.
Original-Maintainer: maximilian attems <maks@debian.org>

Package: e2fslibs
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 279
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: e2fsprogs
Version: 1.42-1ubuntu2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.10), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: base-passwd
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 160
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: armhf
Version: 3.5.24
Replaces: base
Depends: libc6 (>= 2.8)
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: libcomerr2
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 92
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: e2fsprogs
Version: 1.42-1ubuntu2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: mawk
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 150
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 1.3.3-17
Provides: awk
Pre-Depends: libc6 (>= 2.11)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: gnupg
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 1516
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 1.4.11-3ubuntu2.5
Depends: libbz2-1.0, libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libreadline6 (>= 6.0), libusb-0.1-4 (>= 2:0.1.12), zlib1g (>= 1:1.1.4), dpkg (>= 1.15.4) | install-info, gpgv
Suggests: gnupg-curl, gnupg-doc, xloadimage | imagemagick | eog, libpcsclite1
Description: GNU privacy guard - a free PGP replacement
 GnuPG is GNU's tool for secure communication and data storage.
 It can be used to encrypt data and to create digital signatures.
 It includes an advanced key management facility and is compliant
 with the proposed OpenPGP Internet standard as described in RFC 4880.
 .
 GnuPG 1.4 is the standalone, non-modularized series. In contrast to
 the version 2 series, shipped with the gnupg2 package, it comes
 with no support for S/MIME and some other tools useful for desktop
 environments, but also with less dependencies.
 .
 The gnupg package is built without libcurl. So it does not support
 HKPS keyservers. Install the gnupg-curl package if you want to use
 the keyserver helper tools built with libcurl and supporting HKPS.
 .
 GnuPG does not use any patented algorithms. This means it cannot be
 compatible with PGP2, because that uses IDEA (which is patented in
 a number of countries).
Homepage: http://www.gnupg.org
Original-Maintainer: Debian GnuPG-Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 464
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 2.10-1
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0)
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.gnu.org/software/grep/

Package: plymouth
Status: install ok installed
Priority: optional
Section: x11
Installed-Size: 325
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 0.8.2-2ubuntu31.1
Depends: libc6 (>= 2.15-0ubuntu8), libdbus-1-3 (>= 1.1.1), libdrm-nouveau1a (>= 2.4.23), libdrm-radeon1 (>= 2.4.17), libdrm2 (>= 2.4.3), libplymouth2 (= 0.8.2-2ubuntu31.1), libtinfo5, upstart-job, udev (>= 166-0ubuntu4), mountall (>= 2.0), initramfs-tools
Recommends: plymouth-theme-ubuntu-text | plymouth-theme
Breaks: gdm (<< 3.0.4-0ubuntu11), kdm (<< 4:4.7.1-0ubuntu3), lightdm (<< 0.9.7-0ubuntu2), lubuntu-plymouth-theme (<= 0.4), lxdm (<< 0.4.1-0ubuntu2), ubuntustudio-plymouth-theme (<= 0.38), xubuntu-plymouth-theme (<< 10.04.4)
Conflicts: usplash
Conffiles:
 /etc/init/plymouth-log.conf 65d2943a69f455dec3fed43fd7996d76
 /etc/init/plymouth-ready.conf a879350452d6899d167c53b63bf3d53a
 /etc/init/plymouth.conf f8bddf7212b2362f9e37ae9f3a343481
 /etc/init/plymouth-stop.conf 85e687292436631eaa98959be0bad17a
 /etc/init/plymouth-splash.conf 2c0582725491da66e2d09280847e0452
 /etc/init/plymouth-upstart-bridge.conf b2c90588cf9a0cd8a91ad58f67aa7e0e
Description: graphical boot animation and logger - main package
 Plymouth is an application that runs very early in the boot process
 (even before the root filesystem is mounted!) that provides a graphical
 boot animation while the boot process happens in the background.

Package: upstart
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 872
Maintainer: James Hunt <james.hunt@ubuntu.com>
Architecture: armhf
Version: 1.5-0ubuntu7.2
Replaces: startup-tasks, system-services, sysvinit, upstart-compat-sysv, upstart-job
Provides: startup-tasks, system-services, upstart-compat-sysv, upstart-job
Depends: libc6 (>= 2.15-0ubuntu8), libdbus-1-3 (>= 1.2.16), libnih-dbus1 (>= 1.0.0), libnih1 (>= 1.0.0), libudev0 (>= 151), sysvinit-utils, sysv-rc, initscripts, mountall, ifupdown (>= 0.6.10ubuntu5)
Suggests: python, graphviz, bash-completion
Breaks: friendly-recovery (<< 0.2.13), libc6 (<< 2.12.1-0ubuntu12)
Conflicts: lxcguest, startup-tasks, system-services, sysvinit, upstart-compat-sysv, upstart-job
Conffiles:
 /etc/init/wait-for-state.conf 7a4d89f072e4ba9de84599627e53e011
 /etc/init/tty1.conf f42f2298f711147ecf177054294861a7
 /etc/init/tty6.conf e8ad2f0411614f9c8dc9c4e364763549
 /etc/init/shutdown.conf 559659602cefe7e8d3c1e76820f5ae5d
 /etc/init/tty4.conf 2c78cd865d848bb2674104905151dbe2
 /etc/init/upstart-udev-bridge.conf 2c24bb70877476b5e7016ccf6de745a4
 /etc/init/upstart-socket-bridge.conf 5f3eaca09ee1f03d5d0686ea99f8c051
 /etc/init/rcS.conf 3c1a7f7685cc4bdeba2e5624ceb75581
 /etc/init/rc.conf 1b492dd211353c22963ee701a7881cdd
 /etc/init/console.conf 8d79b0205f2daffb473604ce53e1dc83
 /etc/init/control-alt-delete.conf 16e6603524084b63b0f0ca04eb56757e
 /etc/init/flush-early-job-log.conf 09e959647877c39f6490ad29b8a35a28
 /etc/init/failsafe.conf 0b88eeccf6c8fd456e886aa7a76e3291
 /etc/init/container-detect.conf 6bae6257355ad7322e7263e567817465
 /etc/init/tty3.conf 6608f08adf00a282358a1eeb9bdcf78e
 /etc/init/tty5.conf 6d5794f72a1098b008e53e326a6bb5a0
 /etc/init/rc-sysinit.conf a50c045d9390a6e6c43c18b19cd72fe5
 /etc/init/tty2.conf 0d9326fdda081ac96d92bbc57ff773e4
 /etc/dbus-1/system.d/Upstart.conf 64be74cddb0c74b7d98202b40389784c
 /etc/bash_completion.d/upstart 080f7eee4a3f3e5f76197eaa581fb4da
 /etc/logrotate.d/upstart 070767086a27883ec119e1dde779a856
Description: event-based init daemon
 upstart is a replacement for the /sbin/init daemon which handles
 starting of tasks and services during boot, stopping them during
 shutdown and supervising them while the system is running.
Homepage: http://upstart.ubuntu.com/

Package: passwd
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 1696
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: shadow
Version: 1:4.1.4.2+svn3283-3ubuntu5.1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libc6 (>= 2.15-0ubuntu8), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), upstart-job, libpam-modules, debianutils (>= 2.15.2)
Conffiles:
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/init/passwd.conf ea81baf06e4c358225ce22b786ad9e6a
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: http://pkg-shadow.alioth.debian.org/
Original-Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 85
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 3.06ubuntu1
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4), upstart-job
Conflicts: nis (<< 3.17-30)
Conffiles:
 /etc/init/hostname.conf 6cfe98f58ae3bf5fed6558696bbcc488
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.
Original-Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>

Package: libacl1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 67
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: acl
Version: 2.2.51-5ubuntu1
Depends: libattr1 (>= 2.4.46-3), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: libpam-runtime
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 296
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 1.5.19), libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: libslang2
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 1065
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: slang2
Version: 2.2.4-3ubuntu1
Depends: libc6 (>= 2.4), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Recommends: libpng12-0
Description: S-Lang programming library - runtime version
 S-Lang is a C programmer's library that includes routines for the rapid
 development of sophisticated, user friendly, multi-platform applications.
 .
 This package contains only the shared library libslang.so.* and copyright
 information. It is only necessary for programs that use this library (such
 as jed and slrn). If you plan on doing development with S-Lang, you will
 need the companion -dev package as well.
Original-Maintainer: Alastair McKinstry <mckinstry@debian.org>

Package: initscripts
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 218
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: sysvinit
Version: 2.88dsf-13.10ubuntu11.1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Depends: libc6 (>= 2.15-0ubuntu8), debianutils (>= 4), lsb-base (>= 3.2-14), sysvinit-utils (>= 2.86.ds1-64), sysv-rc | file-rc, coreutils (>= 5.93), passwd, upstart, mountall (>= 2.28)
Recommends: psmisc, e2fsprogs
Breaks: hostname (<< 2.95ubuntu1~boot2), rsyslog (<< 4.2.0-2ubuntu3~boot1), selinux-policy-default (<= 2:0.2.20100524-9), udev (<< 146-2~boot6), upstart (<< 0.6.3-2~boot4)
Conflicts: libdevmapper1.02.1 (<< 2:1.02.24-1)
Conffiles:
 /etc/init.d/bootlogd 267ceea04f703171e6c62f506fda3305
 /etc/init.d/stop-bootlogd 4544c7e1a2d0c713d29424d02faad237
 /etc/init.d/stop-bootlogd-single 648d8624e708151500c5e299a6005afe
 /etc/init.d/halt 6ae1b3b1b8198567a5e32116077f12a2
 /etc/init.d/killprocs 5e404d35091fab6c4889302736ed4602
 /etc/init.d/ondemand cc2a79a545967eec1170dc2bb44468e0
 /etc/init.d/rc.local 2964c1446c6453cdde4213eede97ac38
 /etc/init.d/reboot 1b9db1ef7bfd79b128ef85d5065721a6
 /etc/init.d/sendsigs 3b575caa7457cbe6cf096881064b834b
 /etc/init.d/single dc13cb373c5c098a8fb95424701373e3
 /etc/init.d/umountfs 9b65e42431636b29ab429e1e7471b575
 /etc/init.d/umountnfs.sh 5f3600170b867d5408ad5b4ae6f8aae4
 /etc/init.d/umountroot 3be838222127557f1e03d6c17f4d6eb7
 /etc/init.d/urandom 96d5bd37396a40ab5fe7071139f780fc
 /etc/default/bootlogd 70a108da715299a6e33470eb450669fb
 /etc/default/devpts fc857c5ac5fb84d80720ed4d1c624f6e
 /etc/default/halt 18d9844cf8ca8608e2a559a4555e593a
Description: scripts for initializing and shutting down the system
 The scripts in this package initialize a standard Debian
 system at boot time and shut it down at halt or reboot time.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: libblkid1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 192
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: util-linux
Version: 2.20.1-1ubuntu3
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.4.0), libuuid1 (>= 2.16)
Pre-Depends: multiarch-support
Conffiles:
 /etc/blkid.conf 7f4c49e01e0a23d2f4b20eeb32e95abb
Description: block device id library
 The blkid library which allows system programs like fsck and
 mount to quickly and easily find block devices by filesystem UUID and
 LABEL.  This allows system administrators to avoid specifying
 filesystems by hard-coded device names, but via a logical naming
 system instead.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: libss2
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: e2fsprogs
Version: 1.42-1ubuntu2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.11)
Pre-Depends: multiarch-support
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: libpam-modules-bin
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 179
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: pam
Version: 1.1.3-7ubuntu2
Replaces: libpam-modules (<< 1.1.3-2)
Depends: libc6 (>= 2.4), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://pam.sourceforge.net/
Original-Maintainer: Steve Langasek <vorlon@debian.org>

Package: findutils
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 560
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 4.4.2-4ubuntu1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.4.0)
Suggests: mlocate | locate
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/
Original-Maintainer: Andreas Metzler <ametzler@debian.org>

Package: xz-utils
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 372
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 5.1.1alpha+20110809-3
Replaces: xz-lzma (<< 4.999.9beta+20091004-1)
Depends: libc6 (>= 2.7), libgcc1 (>= 1:4.4.0), liblzma5 (>= 5.1.1alpha+20110809)
Suggests: xz-lzma
Breaks: xz-lzma (<< 4.999.9beta+20091004-1)
Description: XZ-format compression utilities
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 This package provides the command line tools for working with XZ
 compression, including xz, unxz, xzcat, xzgrep, and so on. They can
 also handle the older LZMA format, and if invoked via appropriate
 symlinks will emulate the behavior of the commands in the lzma
 package.
 .
 The XZ format is similar to the older LZMA format but includes some
 improvements for general use:
 .
  * 'file' magic for detecting XZ files;
  * crc64 data integrity check;
  * limited random-access reading support;
  * improved support for multithreading (not used in xz-utils);
  * support for flushing the encoder.
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Homepage: http://tukaani.org/xz/

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2164
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 1.42-1ubuntu2
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.42-1ubuntu2), libblkid1 (>= 2.17.2), libc6 (>= 2.11), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libgcc1 (>= 1:4.4.0), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf e2cdbf0620e93949af5857eb4739f949
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.
Homepage: http://e2fsprogs.sourceforge.net
Original-Maintainer: Theodore Y. Ts'o <tytso@mit.edu>

Package: liblzma5
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 263
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: xz-utils
Version: 5.1.1alpha+20110809-3
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Original-Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Homepage: http://tukaani.org/xz/

Package: libnih1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 116
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libnih
Version: 1.0.3-4ubuntu9.1
Pre-Depends: multiarch-support, libc6 (>= 2.15-0ubuntu8), libc6 (<< 2.16)
Description: NIH Utility Library
 libnih is a light-weight "standard library" of C functions to ease the
 development of other libraries and applications, especially those
 normally found in /lib.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih
Original-Maintainer: Scott James Remnant <scott@netsplit.com>

Package: libdb5.1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 949
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: db
Version: 5.1.25-11build1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: Berkeley v5.1 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.1 Berkeley
 database library.
Original-Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Homepage: http://www.oracle.com/technology/software/products/berkeley-db/index.html

Package: insserv
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 203
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 1.14.0-2.1ubuntu2
Depends: libc6 (>= 2.7)
Suggests: bootchart
Breaks: sysv-rc (<< 2.87dsf-3)
Conffiles:
 /etc/insserv.conf d548110b8916421c5dd31fdf2bd3531e
 /etc/bash_completion.d/insserv 32975fe14795d6fce1408d5fd22747fd
Description: Tool to organize boot sequence using LSB init.d script dependencies
 The insserv program is used to update the order of symlinks in
 /etc/rc?.d/ with sysv-rc based on dependencies specified in the
 scripts themselves using LSB init.d script headers.
 .
 This allow each package maintainer to specify their init.d script
 relation to other scripts and make it possible to detect and reject
 script dependency loops as well as making sure all scripts start in
 their intended order.
 .
 The program insserv in this package should be used with care and
 together with the sysv-rc package, as using it incorrectly can lead
 to an unbootable system.
Homepage: http://savannah.nongnu.org/projects/sysvinit
Debian-Vcs-Browser: http://svn.debian.org/wsvn/initscripts-ng/trunk/src/insserv/
Debian-Vcs-Svn: svn://svn.debian.org/initscripts-ng/trunk/src/insserv
Original-Maintainer: Petter Reinholdtsen <pere@debian.org>

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 184
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 1.4-1ubuntu2
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.6), libgcc1 (>= 1:4.4.0)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.
Original-Maintainer: Bdale Garbee <bdale@gag.com>

Package: dpkg
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 5629
Origin: debian
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Bugs: debbugs://bugs.debian.org
Architecture: armhf
Version: 1.16.1.2ubuntu7.2
Pre-Depends: libbz2-1.0, libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libselinux1 (>= 1.32), zlib1g (>= 1:1.1.4), coreutils (>= 5.93-1), tar (>= 1.23), xz-utils
Suggests: apt
Breaks: apt (<< 0.7.7), aptitude (<< 0.4.7-1), dpkg-dev (<< 1.15.8), libdpkg-perl (<< 1.15.8), pinfo (<< 0.6.9-3.1), tkinfo (<< 2.8-3.1)
Conffiles:
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
 /etc/cron.daily/dpkg b6b8dc21210ea50db7cc4636f521758f
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: http://wiki.debian.org/Teams/Dpkg
Original-Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>

Package: libpcre3
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 375
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: pcre3
Version: 8.12-4
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 This package contains the runtime libraries.
Original-Maintainer: Mark Baker <mark@mnb.org.uk>

Package: libncursesw5
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 415
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: ncurses
Version: 5.9-4
Depends: libtinfo5 (= 5.9-4), libc6 (>= 2.4)
Pre-Depends: multiarch-support
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: ubuntu-keyring
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: misc
Installed-Size: 46
Maintainer: Michael Vogt <michael.vogt@canonical.com>
Architecture: all
Version: 2011.11.21.1
Recommends: gpgv
Description: GnuPG keys of the Ubuntu archive
 The Ubuntu project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: busybox-initramfs
Status: install ok installed
Priority: optional
Section: shells
Installed-Size: 257
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: busybox
Version: 1:1.18.5-1ubuntu4.1
Replaces: busybox-cvs-initramfs
Depends: libc6 (>= 2.15-0ubuntu8)
Conflicts: busybox-cvs-initramfs
Description: Standalone shell setup for initramfs
 BusyBox combines tiny versions of many common UNIX utilities into a single
 small executable. It provides minimalist replacements for the most common
 utilities you would usually find on your desktop system (i.e., ls, cp, mv,
 mount, tar, etc.). The utilities in BusyBox generally have fewer options than
 their full-featured GNU cousins; however, the options that are included
 provide the expected functionality and behave very much like their GNU
 counterparts.
 .
 busybox-initramfs provides a simple stand alone shell that provides
 only the basic utilities needed for the initramfs.
Homepage: http://www.busybox.net
Original-Maintainer: Debian Install System Team <debian-boot@lists.debian.org>

Package: libbz2-1.0
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 100
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: bzip2
Version: 1.0.6-1
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Homepage: http://www.bzip.org/

Package: libdrm-intel1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 144
Maintainer: Ubuntu X-SWAT <ubuntu-x@lists.ubuntu.com>
Architecture: armhf
Source: libdrm
Version: 2.4.32-1ubuntu1
Depends: libc6 (>= 2.4), libdrm2 (>= 2.4.3), libpciaccess0
Pre-Depends: multiarch-support
Description: Userspace interface to intel-specific kernel DRM services -- runtime
 This library implements the userspace interface to the intel-specific kernel
 DRM services.  DRM stands for "Direct Rendering Manager", which is the
 kernelspace portion of the "Direct Rendering Infrastructure" (DRI). The DRI is
 currently used on Linux to provide hardware-accelerated OpenGL drivers.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libtinfo5
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 362
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: ncurses
Version: 5.9-4
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.4)
Pre-Depends: multiarch-support
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Original-Maintainer: Craig Small <csmall@debian.org>
Homepage: http://invisible-island.net/ncurses/

Package: libpciaccess0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 63
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libpciaccess
Version: 0.12.902-1ubuntu0.2
Depends: libc6 (>= 2.15-0ubuntu8), zlib1g (>= 1:1.2.3.3.dfsg)
Pre-Depends: multiarch-support
Suggests: pciutils
Description: Generic PCI access library for X
 Provides functionality for X to access the PCI bus and devices
 in a platform-independant way.
Original-Maintainer: Debian X Strike Force <debian-x@lists.debian.org>

Package: libc-bin
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: libs
Installed-Size: 2789
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: eglibc
Version: 2.15-0ubuntu10.5
Replaces: libc0.1, libc0.3, libc6, libc6.1
Breaks: libc0.1 (<< 2.10), libc0.3 (<< 2.10), libc6 (<< 2.10), libc6.1 (<< 2.10)
Conffiles:
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/bindresvport.blacklist d2d1b996add35b65f64a22e9c8413632
 /etc/gai.conf 629c0e2f8276b26c29b95f7ed53074d7
Description: Embedded GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * rpcinfo: report RPC information
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.eglibc.org
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: sysvinit-utils
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: admin
Installed-Size: 230
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: sysvinit
Version: 2.88dsf-13.10ubuntu11.1
Replaces: last, sysvinit (<= 2.86.ds1-65)
Depends: libc6 (>= 2.15-0ubuntu8), libselinux1 (>= 1.32)
Recommends: upstart (>= 0.6.3-4)
Suggests: sash
Conflicts: chkconfig (<< 11.0-79.1-2), last, sysvconfig
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, last, lastb, mesg, pidof, service, sulogin
Homepage: http://savannah.nongnu.org/projects/sysvinit
Original-Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>

Package: multiarch-support
Status: install ok installed
Multi-Arch: foreign
Priority: standard
Section: libs
Installed-Size: 202
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: eglibc
Version: 2.15-0ubuntu10.5
Depends: libc6 (>= 2.13-0ubuntu6)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.eglibc.org
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libnih-dbus1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 55
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libnih
Version: 1.0.3-4ubuntu9.1
Depends: libnih1 (= 1.0.3-4ubuntu9.1), libc6 (>= 2.15-0ubuntu8), libdbus-1-3 (>= 1.2.16)
Pre-Depends: multiarch-support
Description: NIH D-Bus Bindings Library
 libnih-dbus is a D-Bus bindings library that integrates with the main
 loop provided by libnih.
 .
 This package contains the shared library.
Homepage: https://launchpad.net/libnih
Original-Maintainer: Scott James Remnant <scott@netsplit.com>

Package: libselinux1
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 144
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libselinux
Version: 2.1.0-4.1ubuntu1
Depends: libc6 (>= 2.8)
Pre-Depends: multiarch-support
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Original-Maintainer: Russell Coker <russell@coker.com.au>

Package: gcc-4.6-base
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 194
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: gcc-4.6
Version: 4.6.3-1ubuntu5
Breaks: dehydra (<= 0.9.hg20110609-2), gcj-4.6-base (<< 4.6.1-4~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libc6
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 8146
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: eglibc
Version: 2.15-0ubuntu10.5
Replaces: belocs-locales-bin
Provides: glibc-2.13-1, libc6-armhf
Depends: libc-bin (= 2.15-0ubuntu10.5), libgcc1, tzdata
Suggests: glibc-doc, debconf | debconf-2.0, locales
Breaks: nscd (<< 2.15)
Conflicts: belocs-locales-bin, prelink (<< 0.0.20090925), tzdata (<< 2007k-1), tzdata-etch
Conffiles:
 /etc/ld.so.conf.d/arm-linux-gnueabihf.conf fcce838d54cc444500f01049db2aae8c
Description: Embedded GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.eglibc.org
Original-Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>

Package: libpng12-0
Status: install ok installed
Multi-Arch: same
Priority: required
Section: libs
Installed-Size: 244
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: libpng
Version: 1.2.46-3ubuntu4
Replaces: libpng12-dev (<= 1.2.8rel-7)
Depends: libc6 (>= 2.11), zlib1g (>= 1:1.1.4)
Pre-Depends: multiarch-support
Conflicts: libpng12-dev (<= 1.2.8rel-7), mzscheme (<= 1:209-5), pngcrush (<= 1.5.10-2), pngmeta (<= 1.11-3), povray-3.5 (<= 3.5.0c-10), qemacs (<= 0.3.1-5)
Description: PNG library - runtime
 libpng is a library implementing an interface for reading and writing
 PNG (Portable Network Graphics) format files.
 .
 This package contains the runtime library files needed to run software
 using libpng.
Homepage: http://libpng.org/pub/png/libpng.html
Original-Maintainer: Anibal Monsalve Salazar <anibal@debian.org>

Package: udev
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: admin
Installed-Size: 843
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 175-0ubuntu9.4
Depends: libacl1 (>= 2.2.51-5), libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libglib2.0-0 (>= 2.16.0), libselinux1 (>= 1.32), upstart-job, libudev0 (>= 175), module-init-tools (>= 3.2.1-0ubuntu3), initramfs-tools (>= 0.92bubuntu63), procps, adduser, util-linux (>> 2.15~rc2), upstart (>= 1.4-0ubuntu6)
Suggests: watershed
Conffiles:
 /etc/init/udevmonitor.conf b541dfb5aa4958e9a5336ecaec00ca15
 /etc/init/udev.conf b4fb63a560e94cacf94765c9a371db99
 /etc/init/udev-fallback-graphics.conf b8bfe7164e10cd0e53494b243c5728b1
 /etc/init/udev-finish.conf 28ebb3ad2d2c6ca545d72f3f0769f448
 /etc/init/udevtrigger.conf 651ff2421dde80be7ce7ccbf7fa8cf18
 /etc/udev/udev.conf 8b024b79a468658332fbf2586737907e
 /etc/udev/rules.d/README 3b6de9f3f911176734c66903b4f8735c
Description: rule-based device node and kernel event manager
 udev is a collection of tools and a daemon to manage events received from
 the kernel and deal with them in user-space.  Primarily this involves
 creating and removing device nodes in /dev when hardware is discovered or
 removed from the system.
 .
 Events are received via kernel netlink messaged and processed according to
 rules in /etc/udev/rules.d and /lib/udev/rules.d, altering the name of the
 device node, creating additional symlinks or calling other tools and programs
 including those to load kernel modules and initialise the device.
Homepage: http://www.kernel.org/pub/linux/utils/kernel/hotplug/udev.html

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 1064
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 4.2-2ubuntu2.1
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0), libtinfo5
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
 /etc/skel/.bashrc 8da3d6b1fdbdfe97c6be8adadce98172
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/bash.bashrc 286dc423e71186936c39e3507d2d0cf1
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html
Original-Maintainer: Matthias Klose <doko@debian.org>

Package: util-linux
Essential: yes
Status: install ok installed
Multi-Arch: foreign
Priority: required
Section: utils
Installed-Size: 1292
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 2.20.1-1ubuntu3
Replaces: e2fsprogs, fdisk, fstrim, linux32, miscutils, schedutils, setterm, sparc-utils
Provides: linux32, schedutils
Depends: lsb-base (>= 3.0-6), tzdata (>= 2006c-2), dpkg (>= 1.15.4) | install-info, debconf (>= 0.5) | debconf-2.0, upstart-job
Pre-Depends: libblkid1 (>= 2.20.1), libc6 (>= 2.15), libgcc1 (>= 1:4.4.0), libncurses5 (>= 5.5-5~), libselinux1 (>= 1.32), libslang2 (>= 2.0.7-1), libtinfo5, libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: util-linux-locales, kbd | console-tools, dosfstools
Conflicts: console-tools (<< 1:0.2.3-21), fdisk, fstrim, kbd (<< 1.05-3), linux32, schedutils, setterm
Conffiles:
 /etc/init/hwclock-save.conf 4a002046525e338fc23e4418602865c9
 /etc/init/hwclock.conf 132aa3db7e5a8cf55168e4866052208a
Description: Miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system.  Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.
Homepage: http://userweb.kernel.org/~kzak/util-linux/
Original-Maintainer: LaMont Jones <lamont@debian.org>

Package: cpio
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 248
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Version: 2.11-7ubuntu3
Replaces: cpio-mt
Depends: libc6 (>= 2.6), libgcc1 (>= 1:4.4.0), dpkg (>= 1.15.4) | install-info
Suggests: libarchive1
Conflicts: cpio-mt, mt-st (<< 0.6)
Description: GNU cpio -- a program to manage archives of files
 GNU cpio is a tool for creating and extracting archives, or copying
 files from one place to another.  It handles a number of cpio formats
 as well as reading and writing tar files.
Homepage: http://www.gnu.org/software/cpio/
Original-Maintainer: Ruben Molina <rmolina@udea.edu.co>

Package: libstdc++6
Status: install ok installed
Multi-Arch: same
Priority: important
Section: libs
Installed-Size: 861
Maintainer: Ubuntu Core developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: gcc-4.6
Version: 4.6.3-1ubuntu5
Provides: libstdc++6-armhf
Depends: gcc-4.6-base (= 4.6.3-1ubuntu5), libc6 (>= 2.15-0ubuntu8), libgcc1 (>= 1:4.4.0)
Pre-Depends: multiarch-support
Breaks: gcc-4.1, gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/
Original-Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>

Package: libglib2.0-0
Status: install ok installed
Multi-Arch: same
Priority: optional
Section: libs
Installed-Size: 2829
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: armhf
Source: glib2.0
Version: 2.32.4-0ubuntu1
Replaces: libglib2.0-dev (<< 2.23.2-2)
Depends: libc6 (>= 2.15-0ubuntu8), libffi6 (>= 3.0.4), libgcc1 (>= 1:4.4.0), libpcre3 (>= 8.10), libselinux1 (>= 1.32), zlib1g (>= 1:1.2.2)
Pre-Depends: multiarch-support
Recommends: libglib2.0-data, shared-mime-info
Breaks: gdm3 (<< 3.0.3), gnome-control-center (<< 1:3), gnome-session (<< 3.0.0-3), gvfs (<< 1.8), libgtk-3-0 (<< 3.0.12)
Conflicts: bamfdaemon (<= 0.2.92-0ubuntu1), libzeitgeist-gio, wncksyncdaemon
Description: GLib library of C routines
 GLib is a library containing many useful C routines for things such
 as trees, hashes, lists, and strings.  It is a useful general-purpose
 C library used by projects such as GTK+, GIMP, and GNOME.
 .
 This package contains the shared libraries.
Homepage: http://www.gtk.org/
Original-Maintainer: Debian GNOME Maintainers <pkg-gnome-maintainers@lists.alioth.debian.org>

Package: readline-common
Status: install ok installed
Multi-Arch: foreign
Priority: important
Section: utils
Installed-Size: 107
Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
Architecture: all
Source: readline6
Version: 6.2-8
Replaces: libreadline-common, libreadline4 (<< 4.3-16), libreadline5 (<< 5.0-11)
Depends: dpkg (>= 1.15.4) | install-info
Conflicts: libreadline-common, libreadline5 (<< 5.0-11)
Description: GNU readline and history libraries, common files
 The GNU readline library aids in the consistency of user interface
 across discrete programs that need to provide a command line
 interface.
 .
 The GNU history library provides a consistent user interface for
 recalling lines of previously typed input.
Original-Maintainer: Matthias Klose <doko@debian.org>

